Silencer and Muzzle Blast Suppression System for AK-74, AKS-74, AKS74U 5.45

Caliber: 5.45.

Weight: 470±20 grams.

Dimensions: 163x41 mm.

Thread: 24×1.5 (right-handed).

Number of chambers: 6 (the first one is the largest and for recoil reduction).

Noise reduction coefficient for a standard supersonic cartridge: 30-35 dB (up to 40% on hearing).

Shipped via Nova Poshta, with cash on delivery option, no advance payment required!

Usage Instructions: Screw the suppressor onto the barrel thread of the firearm. It should be screwed tightly until it reaches full resistance. The suppressor has a special internal stopper, it should never touch the front sight (the 5.45 front sight only has a stopper from above, so the suppressor will be tilted). Approximately 1.5 mm should remain between the suppressor and the front sight.

During intense shooting, thermal expansion occurs, which leads to loosening of the suppressor. Therefore, after firing 15 rounds, you need to tighten the suppressor again (be sure to use gloves, as the suppressor will already be hot). If the suppressor loosens on the thread, it may result in a "bullet hole". As a result, the bullet may graze the last cone. After re-fixing, it will be securely in place.

Please note that there may be some smoke during the initial uses, this is normal - it is the burning off of the manufacturing grease.

This suppressor is designed for combat use and is intended for maximum loads. Therefore, there are no grooves on the threaded part of the suppressor to prevent further tightening during thermal expansion. Suppressors with grooves can only withstand sportive loads (single shots).

After use, the suppressor should be unscrewed, washed with soapy water or kerosene, and then dried and treated with gun oil.

When firing a standard cartridge, we actually hear two shots. The first is the impact of the bullet on the air, and the second is the impact of the gases on the air. This is why the suppressor only reduces about 50% of the sound. It is capable of reducing only the impact of gases on the air and extinguishing the flame.

The suppressor is not disassemblable.

Suppressors for AK-47 and LMG (RPK) are also available.