|
Quantity
|
Out of stock
|
||
|
|
|||
Weight: 480±20 grams.
Dimensions: 165x41 mm.
Thread: 14×1 (left-hand).
Number of chambers: 6 (first one is the largest and for reduction).
Reduction coefficient of regular supersonic cartridge noise: 30-35 dB (up to 40% to the ear).
Shipment via Nova Poshta, with cash on delivery without prepayment!
Usage Instructions: Screw the silencer onto the barrel thread of the weapon. It must be screwed tightly until it stops. Silencers for 7.62 should be snug against the front sight.
During intensive shooting, thermal expansions occur, which leads to loosening of the silencer's fixation. Therefore, after firing 15 rounds, it is necessary to tighten the silencer again (always with gloves, as the silencer will already have a high temperature). If the silencer loosens on the thread, this can lead to the so-called "bolting". As a result, the bullet may hit the last cone. After re-fixing, it will stay in place.
Please note that during the first uses, the silencer may produce some smoke. This is normal - it is the burning off of the production grease. On the left is a new silencer, on the right is one that has been sighted (clean, without grease):
This silencer is designed for maximum loads.
After use, the silencer must be unscrewed, washed with a soapy solution or kerosene, and then rinsed with clean water. Afterward, it should be dried and treated inside with weapon oil.
When firing a regular cartridge, we actually hear two bangs. The first is the impact of the bullet on the air, and the second is the impact of the gases on the air. This is why the silencer only removes 50% of the noise. It is capable of removing only the impact of the gases on the air and extinguishing the flame.
The silencer is non-disassembling.
We also have silencers available for AK-74, AKS-74, AKS-74U, and RKK.