Kit for AK-74: Suppressor (PBS), recoil buffer and Tromix.

Set for AK-74, AKS-74 (Specify AKS-74U when ordering): Suppressor + Recoil Buffer + Tromix.

Caliber: 5.45.
Weight: 470±20 grams.
Dimensions: 163x41 mm.
Thread: 24×1.5 (right).
Number of chambers: 6 (first one largest and for reduction).
Reduction coefficient of regular supersonic cartridge noise: 30-35 dB (up to 40% to hearing).

Shipped via Nova Poshta (New Mail) with cash on delivery, no prepayment required!

Usage instructions: Screw the suppressor onto the muzzle thread of the weapon. It should be screwed tightly until fully seated. The suppressor has a special internal stop, it should never touch the front sight (the 5.45 front sight only has a top stop, so the suppressor will be slanted). There should be approximately 1.5 mm left to the front sight.

During intensive shooting, thermal expansion occurs, leading to a loosening of the suppressor. Therefore, after firing 15 rounds, it is necessary to re-tighten the suppressor (be sure to use gloves, as the suppressor will already be hot). If the suppressor loosens on the thread, it may lead to the so-called "wobble". As a result, the bullet may hit the last cone. After re-fastening, it will stay in place.

Please note that there may be some smoke during the initial uses; this is normal and is due to the burning off of the factory lubricant.
 

This suppressor is designed for maximum loads. Therefore, there are no grooves on the threaded part of the suppressor that would prevent further tightening during thermal expansion. Suppressors with grooves can only withstand sport loads (single shots).

After use, the suppressor should be unscrewed, washed with soapy water or kerosene, and then dried and treated with gun oil on the inside.

When firing a regular cartridge, we actually hear two bangs. The first is the impact of the bullet on the air, the second is the impact of the gases on the air. This is why the suppressor only reduces 50% of the sound. It can only reduce the impact of gases on the air and extinguish the flame.

The suppressor is non-disassemblable.

Also available are suppressors for AK-47 and RPK (RPK).