|
Quantity
|
Out of stock
|
||
|
|
|||
Type: disassemblable.
Caliber: 5.45.
Weight: 430 grams.
Body Material: D16T aluminum.
Cone Material: V95 aluminum.
Coating: anodizing.
Dimensions: 220x48 mm.
Thread: 24x1.5 (right).
Number of chambers: 8.
Reduction coefficient of regular supersonic cartridge noise: 40-45 dB (up to 50% by ear).
Instructions for use: Screw the silencer onto the barrel thread of the weapon. It should be screwed tightly until it stops completely. The silencer has a special internal stop, it should never touch the front sight (the 5.45 front sight only has a stop from above, so the silencer will be skewed) leaving about 1.5 mm to the front sight.
During intensive shooting, there are thermal expansions, which leads to loosening of the silencer fixation. Therefore, after firing 15 rounds, it is necessary to clamp the silencer again (with gloves, the silencer will already have a high temperature). If the silencer loosens on the thread, this will lead to the so-called "wobbling". As a result, the bullet may touch the last cone. After re-fixing, it will not move anywhere.
This silencer designed for maximum loads. Therefore, there are no slots for fixation on the threaded part of the silencer, which would have made further clamping of the silencer impossible during thermal expansions. Therefore, silencers with slots can withstand only sports loads (single shots).
When firing a regular cartridge, we actually hear two bangs. The first one is the impact of the bullet on the air, and the second one is the impact of the gases on the air. This is why the silencer only reduces 50% of the sound. It is capable of removing only the impact of the gases on the air and removing the flame.
The silencer is disassemblable, so it is important to clean it after each use.
After operation, the silencer must be unscrewed, disassembled, cleaned, and treated inside with gun lubricant.